Stepper motor mount for eq1 telescope mount for sidereal tracking. I'm using T60 6mm pulleys for the worm gear and T20 5mm for the engine.
I'm still having trouble making the Arduino adjustments and code.
I will use an Arduino nano, TMC2209 driver (in 64 steps ms1 Low and ms2 High) and Nema 17 40mm 1.8º per step (200 steps for 360º). I know my wormgear mount has 100 teeth. 100:1 and reduction 3:1 (60 teeth and 20 teeth GT2) Belt 170mm. STEP_DELAY = 22439; //22439 in 64 steps or 44879 in 32 steps.
See the calculations on the website, it explains very well how it does it if there is any difference.
instructions in portuguese Brazil: https://tlbenedetti.blogspot.com/2024/04/acompanhamento-sideral-diy-faca-voce.html
I used instructions from this website: https://www.cloudynights.com/topic/731261-yet-another-diy-ra-drive-for-eq5-exos2-eq3-etc-etc/?fbclid=IwAR1_rOtgk-CFjft_iUjmgFaCgax6wK1FHydeT2jlKYGQrE9xnHBHYtey2AI_aem_ AXT_LotXIklqv6LQrmi-P8d4YMY9qkRs5trHN9N84Z2ab8gP5XpAnCzoVTJKuYAAQ1Ux6iFaWrQqi9HKCLcrFmTk
Thank you Vostok 1 for the calculations.
| controle.stl | 677.3KB | |
| controle_-_com_ventilacao.stl | 792.6KB | |
| controle_-_com_ventilacao_tampa.stl | 575.8KB | |
| controle_tampa.stl | 417.1KB | |
| nema17_mount_telescope.stl | 377.5KB | |
| nema17_mount_telescope_com_tampa.stl | 453.2KB | |
| RA_to_Thiago.ino | 5.5KB | |
| trava_suporte_nema17_dir.stl | 31.8KB | |
| trava_suporte_nema17_esq.stl | 27.5KB |
