NEJE Master 2S Plus Laser Engraver Hight Adjustment Mount, Increase, Riser Support 3D Printer Model
The file 'NEJE Master 2S Plus Laser Engraver Hight Adjustment Mount, Increase, Riser Support 3D Printer Model' is (stl) file type, size is 13.0MB.
The file 'NEJE Master 2S Plus Laser Engraver Hight Adjustment Mount, Increase, Riser Support 3D Printer Model' is (stl) file type, size is 13.0MB.
UNDER DEVELOPMENT
Height-adjustable base for the NEJE Master 2S Plus Laser Engraver, consisting of 2 different parts (front and back), plus 4 screws that allow you to raise the base by 100mm.
Manual twist screws or twist using a screwdriver, each complete turn of the screw raises the height of the base by 3mm, the screws have markings on the top to signal each third of a turn, which corresponds to 1mm of elevation. It also has small tears near the bases for inserting a ruler to help measure the height. Currently designed for 150x15x0.6mm metal ruler
The project is in the prototyping phase, I'm still in print.
Fixes:
v2 - Fixed ruler leak; banner relief depth; thread play; Hex Bit Allen Socket leak
v3 - Adjusted height from front base foot level to ground level, allowing standard product height as starting height ; adjust the height of the controller board slot, Removed thread chamfers
v3.1 and v3.2 - correcting symmetry and other small adjustments
| Back_Base_for_NEJE_Master_2S_Plus_Laser_Engraver_CNC_v3.1.stl | 860.1KB | |
| Back_Base_for_NEJE_Master_2S_Plus_Laser_Engraver_CNC_v3.stl | 843.5KB | |
| Front_Base_for_NEJE_Master_2S_Plus_Laser_Engraver_CNC_v3.1.stl | 907.9KB | |
| Front_Base_for_NEJE_Master_2S_Plus_Laser_Engraver_CNC_v3.stl | 891.3KB | |
| Screw_for_NEJE_Master_2S_Plus_Laser_Engraver_CNC_v2.stl | 12.7MB | |
| Screw_for_NEJE_Master_2S_Plus_Laser_Engraver_CNC_v3.2.stl | 13.0MB |
