This is a very flat, height adjustable holder rail for the Neje 40W Laser.
Due to the possible heat I printed it from ASA, but maybe PETG or PLA will work as well.
It add`s 4mm to the laser thickness only.
Its printable without supports.
at least 3 M3 inserts are needed.
it can be fixed with 2 or 4 M3 screws on the Z-Axis, one M3 is needed to secure the Laser in the rail.
I did add one with some more fixation holes..
| Laser_40w_holder-inserts.stl | 513.6KB | |
| Laser_40w_holder-inserts_2.stl | 1.1MB | |
| Laser_40w_holder-inserts_3.stl | 1.1MB | |
| Laser_40w_holder-M3_only.stl | 494.0KB |
