Needle File Handles | File Handle Replacement 3D Printer Model
The file 'Needle File Handles | File Handle Replacement 3D Printer Model' is (3mf,f3d,stl) file type, size is 1.4MB.
The file 'Needle File Handles | File Handle Replacement 3D Printer Model' is (3mf,f3d,stl) file type, size is 1.4MB.
There are 3 different versions of these files handles with 3 different inside diameters (they are labeled 1-3 on the end of the handle). The needle files I made these for had a shaft outside diameter of 0.1135''.
1 = Very Tight - (honestly this is the one I like… even though they take a while to get on with some twisting involved)
2 = Tight - (this was likely the factory fit)
3 = Loose - (too loose for my application, but I figured I'd add another version for slightly larger shafts…. note you can always scale these up and down to fit your needs!)
I printed mine with no brim and PLA+… 35% fill but this was probable not needed.
Cheers,
Red Beard Ops
| File_Handles_VTight_Tight_Tightish_v10.3mf | 613.6KB | |
| File_Handles_VTight_Tight_Tightish_v10.f3d | 241.6KB | |
| File_Handles_VTight_Tight_Tightish_v10.stl | 2.4MB |
