This will hold 25 rings from Necromolds. You'll need Qty:6 M3 x 35mm screws, and nuts. I think you can use 30mm screws if you don't use the screw covers. The Logo is an inlay that needs to be glued in. I used a textured build plate on the box and a smooth plate on the logo to give some textural contrast. I designed it to be the same size as the expansion box Call to Arms.
Here is a link to the tinkercad design if anyone is interested in changing it up.
https://www.tinkercad.com/things/67Rj7WOOX7N-necromolds-ring-box
Credit: A lot of people have remixed this rugged box and I have taken elements from a lot of them to combine into this. I've tried to give credit to the original design of the box. the latches came from https://www.printables.com/de/model/39729-tool-box-parametric.
| Bolt_Cover.stl | 37.6KB | |
| Box.stl | 246.8KB | |
| Cap.stl | 24.9KB | |
| Latch.stl | 59.4KB | |
| Lid.stl | 3.6MB | |
| Logo.stl | 1.7MB | |
| Nut_Cover.stl | 26.3KB | |
| Ring_Insert_V2.stl | 54.1MB |
