The model has been cut into several section to be able to print it without support.
It has been increased in size to a length of 250mm.
To make the lineup for the gluing easier FilaPins are added to each cut.
For that you will need 6 peaces of 1.75mm filament which are 9mm long.
Therefore i do not suggest to scale the model.
Also a 3mm hole as been added to part 5 to present the ship on the base.
As a support an peace of 3mm clear filament can be used.
Star Trek Ship Base design: https://www.thingiverse.com/thing:3361765
If you don't want the hole for the stand you can use the part 5 without hole.
Credits go to Nerys for the grate model of the Voyager:
https://www.thingiverse.com/thing:2499656/files
Edit 2019-01-27
Part 3 was incorrect. Has been fixed and replaced.
| NCC-74959_All.stl | 29.9MB | |
| NCC-74959_All_no_hole.stl | 29.0MB | |
| NCC-74959_P1.stl | 17.3MB | |
| NCC-74959_P2.stl | 7.5MB | |
| NCC-74959_P2_no_hole.stl | 6.6MB | |
| NCC-74959_P3.stl | 2.3MB | |
| NCC-74959_P4.stl | 2.9MB | |
| Ship_Base_V1.0.stl | 321.2KB |
![Bowls For The Toy Kitchen [no Supports] 3D Printer Model](https://res.3axis.co/fa846118-6172-4776-b1a6-e185779b30d9/images/7dbf78b5-6920-4442-8814-8a5492f7c37e_thumb.jpg)
