‼️IF YOU CAN’T DOWNLOAD WITH 404 ERROR‼️
‼️PLEASE DOWNLOAD SEPARATELY‼️
‼️404エラーが出る場合はファイルを1個ずつダウンロードしてください‼️
Or just go here https://www.prusaprinters.org/prints/88377-nautilus-nozzle-bunker-

Limited edition is here
https://cults3d.com/en/3d-model/tool/nautilus-nozzle-bunker-limited-edition

▪　Latch: Use support. 0.2mm layer height.
▪　Holder: No support needed. This should be printed in following settings.
　　Initial layer height : 0.2mm, Other:0.15mm
UPDATE:Holder04 add more space to rotate nozzle, printable with 0.2mm. No need to print Holder03.
▪　Cover: No support needed. Use 0.2mm layer height.

Wall: Please adjust to 3 or more for everything.
Print orientation: Please refer CURA screen shot.

Use M3 socket head cap screw.

What I'm planning to update is add some sort of thumb grip to make it easier to remove.
(It is already easy to remove I believe)
Feel free to post feedback! And don’t forget to post your make!…and follow/like!

I really appreciate if you give me a tip!

STEP file can be share but you need to follow rules below

1. Post remix as remix of this Thing.
2. Share with same license. Do not violate my license.
   Creative Commons attribution Non commercial Share alike

If you agree then contact me via Instagram or Twitter.

UPDATE 2021/11/26
Add print orientation instruction.
UPDATE 2021/12/04
Add STEP files. Please follow my license. Plus, don't forget to share your make! I would love to see!
UPDATE 2022/04/19
Removed Step file. Add limited edition link
https://cults3d.com/en/3d-model/tool/nautilus-nozzle-bunker-limited-edition