Nassenheider Inverto Clone – Turnable Decapping Device For Honeycombs 3D Printer Model
The file 'Nassenheider Inverto Clone – Turnable Decapping Device For Honeycombs 3D Printer Model' is (pdf,stl) file type, size is 5.9MB.
The file 'Nassenheider Inverto Clone – Turnable Decapping Device For Honeycombs 3D Printer Model' is (pdf,stl) file type, size is 5.9MB.
Turnable device for decapping honeycombs (replica of "Nassenheider Inverto").
Especially usefull for using a hot air decapping gun in one hand.
Application video original:
https://www.youtube.com/watch?v=xxwl2EMdygE
You will need:
-) 1 x 2020 aluminium profile type 6 B, length = 377 mm (for austrian "Einheitsmaß" with a length of 370 mm)
-) 2 x 2020 aluminium profile type 6 B, length = 130 mm (for austrian "Einheitsmaß" with a length of 370 mm)
-) 2 x 2020 internal corner brackets type 6 B
-) 2 x 2020 type 6 B M5 hammer nuts + bolts
-) 6 x M4 bolts + nuts
Use the drilling template to drill the four 4 mm holes inside the decapping box (do not scale the pdf when printing, otherwise the dimensions do not match!).
Edit: 08.07.2020: I think it's better to not mount the two short beams on the side of the long one like I did but on the upper surface. It's then easier to change the distance/width of the frame spacers because they are moveable.
| drilling_template.pdf | 110.3KB | |
| Entdeckelungshilfe_links.stl | 3.9MB | |
| Entdeckelungshilfe_rechts.stl | 4.0MB | |
| Kugeleinsatz.stl | 8.4MB | |
| Nutprofil.stl | 42.9KB |
![[HSW] Sewing Machine Presser Foot Shelf Remix For Honeycomb Storage Wall 3D Printer Model](https://cdn.3axis.co/assets/7f/00/b4/4a/7f00b44a-ec67-45b5-9724-b590abcdcab7/images/829329ee-0cd5-44e6-a337-df39269abce2_thumb.jpg)
