This is the collection of parts needed to build semi-scale 1:100 Ares I and Ares V flying model rockets from scratch. Please note, however, that the diameters of the various parts of the rockets are off by a few millimeters to accommodate for commonly available paper tube sizes.
The model for the Orion launch escape system on Ares I was adapted from this model of SLS by astro_sam on Thingiverse: https://www.thingiverse.com/thing:2681457
The model for the RS-25 engines on Ares V was adapted from this model of the SSME engine bells by nissehutt on Thingiverse:
https://www.thingiverse.com/thing:391170
All other parts designed by Kevin Hu and Theo Rulko in 2018.
| Ares_I_Detail_1.stl | 1.1KB | |
| Ares_I_Detail_2.stl | 96.2KB | |
| Ares_I_Detail_3.stl | 96.2KB | |
| Ares_I_Detail_4.stl | 684.0B | |
| Ares_I_Display_Stand.stl | 249.8KB | |
| Ares_I_Forward_Frustrum_and_Interstage.stl | 369.0KB | |
| Ares_I_Orion_Heatshield_+_Launch_Abort_System_Not_Scaled.stl | 1.4MB | |
| Ares_I_Upper_Stage_Tube_Coupler_OPTIONAL.stl | 40.3KB | |
| Ares_I_Upper_Stage_Tube_OPTIONAL.stl | 25.1KB | |
| Ares_V_Cargo_Fairing.stl | 2.4MB | |
| Ares_V_Corrugations_Bottom.stl | 2.4MB | |
| Ares_V_Corrugations_Middle.stl | 2.4MB | |
| Ares_V_Corrugations_Top.stl | 2.4MB | |
| Ares_V_Detail.stl | 8.8KB | |
| Ares_V_Inner_Tube_Brackets_Lasercut.ai | 1.5MB | |
| Ares_V_Main_Engine_Mount.stl | 118.6KB | |
| Ares_V_Main_Stage_Side_Rod.stl | 59.1KB | |
| Ares_V_Midsection.stl | 516.2KB | |
| Ares_V_RCS_Thruster.stl | 240.9KB | |
| Ares_V_RS-25_Engine.stl | 594.5KB | |
| Ares_V_SRB_Physical_Attachment_Points.stl | 3.0KB | |
| SRB_Aft_Skirt_+_Nozzle.stl | 82.5KB | |
| SRB_Booster_Attachment_Point_Ares_V_Only.stl | 25.4KB | |
| SRB_Major_Ring.stl | 40.3KB | |
| SRB_Nosecone_Ares_V_Only.stl | 56.0KB | |
| SRB_Rings_Lasercut.ai | 1.5MB | |
| SRB_Side_Rod.stl | 8.8KB |
