Naruto Eye Coasters 3D Printer Model
The file 'Naruto Eye Coasters 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Naruto Eye Coasters 3D Printer Model' is (stl) file type, size is 1.2MB.
These are coasters of the various (canon) eye dojutsu from Naruto and Naruto Shippuden.
You can pause the print at the desired height using your slicer so that you can swap out the filament color to get the look as seen in the pictures.
Included is a holder for the coasters as well.
Keep in mind that some of them may not be the most balanced or flat for drinks to be put on and the drink may not sit on it completely balanced.
By default, the coasters are 3mm in height. The designs are 1mm in height. If that's too high and causing too much imbalance for drinks placed on them, try reducing the height of the model in your slicer before printing.
Download all files here.
Sharingan
One Tomoe
Two Tomoe
Three Tomoe
Mangekyo Sharingan
Itachi Uchiha
Sasuke Uchiha
Kakashi/Obito Uchiha
Izuna Uchiha
Madara Uchiha
Shisui Uchina
Shin Uchiha
Eternal Mangekyo Sharingan
Sasuke Uchina
Madara Uchiha
Rinnegan
Regular Rinnegan
Sasuke's Rinnegan
The Rinne Sharingan (aka the Sharinnegan)
Byakugan
| Byakugan.stl | 120.4KB | |
| Coaster_Holder.stl | 1.3MB | |
| Itachi_Mangekyo_Sharingan.stl | 172.6KB | |
| Izuna_Mangekyo_Sharingan.stl | 96.4KB | |
| Kakashi-Obito_Mangekyo_Sharingan.stl | 146.6KB | |
| Madara_Eternal_Mangekyo_Sharingan.stl | 246.6KB | |
| Madara_Mangekyo_Sharingan.stl | 271.0KB | |
| Rinnegan.stl | 343.6KB | |
| Rinne_Sharingan.stl | 348.4KB | |
| Sasuke_Eternal_Mangekyo_Sharingan.stl | 135.8KB | |
| Sasuke_Mangekyo_Sharingan.stl | 129.4KB | |
| Sasuke_Rinnegan.stl | 423.5KB | |
| Sharingan_One_Tomoe.stl | 170.5KB | |
| Sharingan_Three_Tomoe.stl | 221.9KB | |
| Sharingan_Two_Tomoe.stl | 192.1KB | |
| Shin_Mangekyo_Sharingan.stl | 95.0KB | |
| Shisui_Mangekyo_Sharingan.stl | 122.3KB |
