Narrow Gauge (32mm) Diesel Loco With Working Motion 3D Printer Model
The file 'Narrow Gauge (32mm) Diesel Loco With Working Motion 3D Printer Model' is (pdf,stl) file type, size is 1.5MB.
The file 'Narrow Gauge (32mm) Diesel Loco With Working Motion 3D Printer Model' is (pdf,stl) file type, size is 1.5MB.
A freelance open-cab narrow gauge diesel locomotive with working motion, for 32mm gauge garden railways. I've always been fascinated by the rather hypnotic motion of rods and counterweights on narrow gauge locomotives with wheels inside the frames, so I had to have a go at making one - this is the result. Here's a brief video of it in action.
Please see the Assembly Instructions PDF document for details of my recommended assembly sequence.
| Assembly_Instructions.pdf | 355.0KB | |
| BatteryBase.stl | 3.4KB | |
| BrakesL.stl | 31.3KB | |
| BrakesR.stl | 31.3KB | |
| Buffer.stl | 73.6KB | |
| CabFront.stl | 22.3KB | |
| CabRear.stl | 40.1KB | |
| CabSideBL.stl | 27.8KB | |
| CabSideBR.stl | 27.8KB | |
| CabSideFL.stl | 24.2KB | |
| CabSideFR.stl | 24.2KB | |
| Cap.stl | 12.6KB | |
| Chassis1.stl | 64.5KB | |
| Chassis2.stl | 61.2KB | |
| Console.stl | 43.1KB | |
| CouplingRod.stl | 28.8KB | |
| Crank.stl | 38.0KB | |
| Engine.stl | 141.4KB | |
| Exhaust.stl | 25.7KB | |
| Footplate.stl | 60.8KB | |
| Frame.stl | 123.3KB | |
| Frame_NM.stl | 140.0KB | |
| Handle1.stl | 75.2KB | |
| Handle2.stl | 68.6KB | |
| Handle3.stl | 68.6KB | |
| HandWheel.stl | 203.6KB | |
| HoodFront.stl | 731.8KB | |
| HoodLoc.stl | 1.6KB | |
| HoodSideL.stl | 93.4KB | |
| HoodSideR.stl | 93.4KB | |
| HoodTop.stl | 74.8KB | |
| HornL.stl | 65.4KB | |
| HornR.stl | 65.4KB | |
| LampBack.stl | 49.9KB | |
| Lever1.stl | 4.6KB | |
| Lever2.stl | 103.9KB | |
| Nameplate.stl | 147.8KB | |
| No3.stl | 111.8KB | |
| Panel.stl | 24.9KB | |
| Radiator.stl | 52.4KB | |
| Seat.stl | 2.6KB | |
| Spacer.stl | 59.1KB | |
| StepA.stl | 14.8KB | |
| StepB.stl | 14.8KB | |
| Wheel.stl | 181.3KB |
