Nano-Sim Holster
Holster for travelling with a nano-sim card together with an iPhone sim removal pin.
Printing:
- Recommended 0.3mm nozzle max
- Print the Outer element vertically
- Print the Inner element horizontally
- Have your "Horizontal Expansion" (Cura name) setting calibrated so that a X mm cylinder will fit into a X mm hole. This setting could have an other name in slicers other than Cura. A typical value for FDM printers is around -0.07mm when using a 0.3mm nozzle. A more negative value will give a larger clearance.
This point is important as there is very small clearance in the object dimensions.
So, either try with -0.07mm or calibrate your Horizontal Expansion setting with the following: https://www.thingiverse.com/thing:4905876
Customizing:
- Create yourself a free account at onshape.com
- Copy my thing
- Customize it for your own needs
OnShape.com link:
https://cad.onshape.com/documents/591edd6a2bcdff2d5575246b/v/d7734ec3ab3cd5ae5e3495ca/e/b38130426bd742b83579477b?renderMode=0&uiState=61bcc0130cf5b46cfb21b401
