Nano G2 Ultra Case
Carrying Loop
2x M3x10mm Nylon Button Head Screws to hold loop into place. Fill hole with glue and press into place.
Base
4x M3x25mm socket head cap screws
4x M3 Hex nuts
1x 6mm x 2mm magnet (or similar size)
2x M2x10mm socket head cap screws
2x M2 hex nuts
1x Slide switch
1x set of JST 1.25 connectors
Door
1x 12mm x 3mm magnet
1x M3x25mm socket head cap screw
1x M3 Hex nuts
Window
1x 1.5"x1.5"x1/8" acrylic square
1x plastic glue or epoxy
Replace M3 acorn nuts on Nano G2 Ultra with lower profile standard nylon hex nuts.
https://amazon.ca/gp/product/B083HVNSFV
https://amazon.ca/gp/product/B01NBVGPH5
https://amazon.ca/gp/product/B07BJFD6FL
https://amazon.ca/gp/product/B09WRF51KY
https://amazon.ca/gp/product/B06Y4N8XWG
https://amazon.ca/gp/product/B01LXTPMFX
https://amazon.ca/gp/product/B07BTTWVDB
| ultra1.STL | 738.3KB | |
| ultra2.STL | 658.6KB | |
| ultra3.STL | 202.8KB | |
| ultra4.STL | 8.1KB | |
| ultra5.STL | 28.2KB | |
| ultra6.STL | 60.7KB |
