Nano FPV Tank Obstacle Pack 3D Printer Model
The file 'Nano FPV Tank Obstacle Pack 3D Printer Model' is (stl) file type, size is 489.7KB.
The file 'Nano FPV Tank Obstacle Pack 3D Printer Model' is (stl) file type, size is 489.7KB.
Nano FPV Tank Obstacle Pack
Hi All! These accessories have been designed for the Nano FPV Tank that can be found here: https://www.thingiverse.com/thing:6752216
There is also and accessory pack for the Nano FPV Tank which is great for customizing you tank which can be found here: https://www.thingiverse.com/thing:6753460
Although these have been made to suit the Nano FPV Tank, these obstacles would also work great with any small RC vehicle.
There are 4 options:
Oil Barrel
Ramps
Bridge
Walls/Bricks
Ramp
7.5x6cm and 2.5cm High
The Ramp has been designed to be compatible with the bridge option or can be used on its own to help get up and onto objects. If you want a wider Ramp, simply print more and place/glue next to each other.
The Ramp has been designed so it can be printed with no supports or rafts and strong while using minimal material. Simply turn it on its side in your slicing program.
Bridge
5.5x6cm and 2.5cm High
The Bridge has been designed to be compatible with the Ramp. These can be place in a row or next to each other to extend or widen to suit your obstacle course.
As with the Ramp, the Bridge designed so it can be printed with no supports or rafts and strong while using minimal material. Simply turn it on its side in your slicing program.
Oil Barrels
These are perfect to use as cones or stack to have fun crashing though them! These are a very easy print. No supports or raft needed!
Walls and Bricks
These are a perfect addition for any obstacle course. With 7 wall options available you can print and place them in any configuration to suit your course.
I have also added two bricks (one full size and one half size) that are compatible with the wall so you can use these on their own or to build your own custom walls if the wall options don’t quite suit what you need. Simply multiply in your slicer program and stack them the way you want them.
For best results and faster printing with no supports or rafts needed, place the walls on their side in your slicer program.
If you have any great ideas for more obstacles, let me know in the comments and i will add them to the collection.
Any advice is welcome and don’t forget to share your build!
Happy Printing! 😊
| Brick_1.stl | 31.1KB | |
| Brick_2.stl | 31.1KB | |
| Bridge_60x25x55.stl | 95.6KB | |
| Oil_Barrel_20x25.stl | 265.9KB | |
| Ramp_75x25x55.stl | 92.9KB | |
| Wall_1.stl | 217.9KB | |
| Wall_2.stl | 248.7KB | |
| Wall_3.stl | 187.0KB | |
| Wall_4.stl | 124.7KB | |
| Wall_5.stl | 155.9KB | |
| Wall_6.stl | 280.4KB | |
| Wall_7.stl | 279.6KB |
