Naboo Fighter N1 Mandalorian Version For Action Figures 3D Printer Model
The file 'Naboo Fighter N1 Mandalorian Version For Action Figures 3D Printer Model' is (stl) file type, size is 80.0MB.
The file 'Naboo Fighter N1 Mandalorian Version For Action Figures 3D Printer Model' is (stl) file type, size is 80.0MB.
[update 17.3.22: Made a stand for the model https://www.thingiverse.com/thing:5320813
Added a multicolour version of the Cockpit canopy. Frame+ separate window. Cut out the cross in the frame after printing,its only to get a stable printing. Youhave to glue these two parts.
Added split parts for 6" printing on smaller printers. ]
A detailled Modell for 3,75" action figures (suitable for 6" when printed at 160% size) from the N1 Naboo fighter in the version which is see in Book of Boba Fett Season 1 Episode 5-7. The "Razor Crest 2"
No action figures included.
With cockpit suitable for Mando and a seat for Grogu. Front Canopy slides open just like in the film.
Find the Naboo version here:
https://www.thingiverse.com/thing:5277865
With new connection system! You don´t need to glue the parts. But be warned: If fitted together with the connectors installed you probably can´t separate them again.
If you like my models consider giving me a tip, I support children in need with the money. And please give the model a like.
Find a very good Grogu Figure Here you can Scale.
https://www.thingiverse.com/thing:4792365
Should be around 20mm high for 3,75, 30mm for 6"!
Printing instructions:
Needs a printer with 20x20 Print bed (30x30 vor 6" version) Print at 160" if vou want a version for 6" figures. Print all parts except the Tail without supports! For the tail activate "supports/Touching built plate only"! Print all files in the already placed position. No need to turn them in Cura. Recommended is 0.2 layer and 15-20% infill. There are two versions for the canopy. One with the windows modelled and one without the clear parts. print the version you want.
Legal stuff:
BY DOWNLOADING THE FILES FROM THINGIVERSE YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS:
The files are for private use only!
You are allowed to print parts from them for your personal use only!
You are not allowed to use this files or parts you printed with the use of this files of it in any comercial way!
If you are distributing Pictures from parts or models you build with theses files you are only allowed to to so if you are declaring the source of the design. You have to add a link to this thingiverse-thing in the description of your Fotos!
You are not allowed to copy or distribute them in any way!
You are not allowed to sell them or parts you printed from them or models you build with the use of this files!
| N1_Back.stl | 6.4MB | |
| N1_Bubble_Frame.stl | 48.7KB | |
| N1_Bubble_Full.stl | 1.5MB | |
| N1_Canopy_Full.stl | 2.3MB | |
| N1_Connector_1.stl | 107.3KB | |
| N1_Connector_11.stl | 1.2MB | |
| N1_Engine_LB.stl | 26.4MB | |
| N1_Engine_LF.stl | 41.6MB | |
| N1_Engine_RB.stl | 26.4MB | |
| N1_Engine_RF.stl | 41.3MB | |
| N1_Front.stl | 20.7MB | |
| N1_Middle.stl | 6.0MB | |
| N1_Nose.stl | 12.7MB | |
| N1_Split_Front_L.stl | 7.0MB | |
| N1_Split_Front_R.stl | 1.9MB | |
| N1_Split_Nose_L.stl | 3.7MB | |
| N1_Split_Nose_R.stl | 2.1MB | |
| N1_Tail.stl | 2.0MB | |
| NA_MC_Canopy.stl | 660.1KB | |
| NA_MC_Canopy_Window.stl | 335.2KB |
