Does your Yardmaster got rolling stock to weigh? This working weight station will do it.
This is a N Scale -Working- Railcar Weight Station. While the thing here is made for N scale the code and possibly the sensor base and armatures could be used for other scales.
You have three options for the look of the weight bridge and the shroud around it so you should have a lot of variety.
The station office is from another one of my things in my designs.
This is also my first Arduino program project for the public and I've never done something like this before. I've done my best to make the code solid and remove bugs through testing. If you have any issues or ideas for improvement post it on Github. I'll see what I can do to improve the code.
https://github.com/ajkochev/N_Scale_Working_Railcar_Weight_Station
Be sure to download the two Word documents in the thing files for assembly and operating instructions.
| N_Scale_Weight_Armature.stl | 482.8KB | |
| N_Scale_Weight_Bridge_1.stl | 2.9MB | |
| N_Scale_Weight_Bridge_2.stl | 619.0KB | |
| N_Scale_Weight_Bridge_OldTime.stl | 2.1MB | |
| N_Scale_Weight_Control_Panel.stl | 16.5MB | |
| N_Scale_Weight_Sensor_Base.stl | 705.6KB | |
| N_Scale_Weight_Shroud_1.stl | 81.3KB | |
| N_Scale_Weight_Shroud_2.stl | 62.8KB | |
| N_Scale_Weight_Shroud_OldTime.stl | 119.2KB | |
| N_Scale_Working_Railcar_Weight_Station_Operating_Instructions.docx | 13.7KB | |
| N_Scale_Working_Weight_Station_Install_Instructions.docx | 955.0KB |
