Got goods to haul on your layout roadways? These trucks are up for the job.
I got the base design from an open-source design on another site for toy trucks. I really liked the modular beds that are interchangeable and the flip up cab.
I added details and made several improvements to the designs while converting them to N scale.
Beds included are:
Tanker
Flatbed
Dump (posable)
Box (open and closed)
You will need to sand and file the prongs on the underside of the beds and the truck base to allow them to fit without breaking.
I recommend assembling the dump bed after cleaning but before curing. Drill out the lower hydraulic piece before curing to remove excess resin. Cut the upper hydraulic pole to the length you need.
| Truck_Base-Supported.stl | 7.2MB | |
| Truck_Base.stl | 2.5MB | |
| Truck_Box_Closed-Supported.stl | 4.0MB | |
| Truck_Box_Closed.stl | 779.6KB | |
| Truck_Box_Open-Supported.stl | 4.0MB | |
| Truck_Box_Open.stl | 570.2KB | |
| Truck_Cab-Supported.stl | 4.5MB | |
| Truck_Cab.stl | 3.1MB | |
| Truck_Cement-Supported.stl | 4.6MB | |
| Truck_Cement.stl | 2.0MB | |
| Truck_Dump-Supported.stl | 5.6MB | |
| Truck_Dump.stl | 1.2MB | |
| Truck_Flatbed-Supported.stl | 3.4MB | |
| Truck_Flatbed.stl | 689.9KB | |
| Truck_Tanker-Supported.stl | 2.3MB | |
| Truck_Tanker.stl | 1.3MB |
