These are v3 of my signals. I've decided to release them by target size so you will see Single, Dual and Triple lights as separate things. You will also find general parts as a separate thing as well under my designs.
You will need the following as well to complete the signals:
1.2mm OD Brass tube
CA Glue
603 SMD LEDS with 40AWG wire soldered to them.
Tools:
Files and Sanding sticks for cleanup.
Hobby Knife and nippers for cleanup and cutting.
1.2mm Drill Bit
For the target backs you will need to drill holes where you want the connectors to go and the LED wires to come out. You will also use the 1.2mm bit to clean out holes in the bases, connectors and other parts as well as the lens holes in the target.
My signal parts are all interchangeable so you can make then to your own needs and style. Look for the rest of my signal types to be posted in the coming weeks.
| N_Scale_COMPLETE_Signal_Triple_Deephood_Lighted.stl | 51.7MB | |
| N_Scale_COMPLETE_Signal_Triple_Lighted.stl | 50.6MB | |
| N_Scale_Signal_Triple_Alt_Target.stl | 2.5MB | |
| N_Scale_Signal_Triple_Deephood_Target.stl | 44.9MB | |
| N_Scale_Signal_Triple_Target.stl | 44.0MB |
