Need to transfer containers to and from well cars? This Intermodal Crane with lift you to new heights.
Update: 1-2-2023 Added two bar railing that I forgot when posted.
This is my first design, designed around a resin printer. I did use a PLA printer for the larger parts as they didn’t need to be in resin. You don’t have to use my design for the equipment boxes, catwalks or railing’s locations. This is just how I decided to model mine. The only thing I added to the model was stretched sprue for hoses/wires painted black first then glued on the pre-painted model.
The height and position of the lifter can be adjusted as well as the cab height. You can also model the lifter bars to the length you want.
The well car and containers are also 3D printed but not my design.
The well car can be found here:
https://www.thingiverse.com/thing:5455635
The container here:
https://www.thingiverse.com/thing:4610462
| 2_Bar_Railing-Supported.stl | 1.4MB | |
| 2_Bar_Railing.stl | 59.5KB | |
| N_IC_Brackets-Supported.stl | 6.5MB | |
| N_IC_Brackets.stl | 4.4MB | |
| N_IC_Cab.stl | 1.2MB | |
| N_IC_Cage_Ladder-Supported.stl | 14.1MB | |
| N_IC_Cage_Ladder.stl | 12.4MB | |
| N_IC_Catwalk-Supported.stl | 5.4MB | |
| N_IC_Catwalk.stl | 4.5MB | |
| N_IC_Equipment.stl | 1.2MB | |
| N_IC_Eyelets.stl | 9.5MB | |
| N_IC_Frame.stl | 324.5KB | |
| N_IC_Ladder-Supported.stl | 2.2MB | |
| N_IC_Ladder.stl | 1.1MB | |
| N_IC_Lifter.stl | 113.0KB | |
| N_IC_LifterMotors.stl | 4.6MB | |
| N_IC_WheelSet-Supported.stl | 23.8MB | |
| N_IC_WheelSet.stl | 16.5MB | |
| N_IC_Worker_Sitting-Supported.stl | 1.8MB | |
| N_IC_Worker_Sitting.stl | 1.5MB |
