Nürburgring Nordschleife Circuit Big Wall Art With LED And Wall Mount 3D Printer Model
The file 'Nürburgring Nordschleife Circuit Big Wall Art With LED And Wall Mount 3D Printer Model' is (stl) file type, size is 426.0KB.
The file 'Nürburgring Nordschleife Circuit Big Wall Art With LED And Wall Mount 3D Printer Model' is (stl) file type, size is 426.0KB.
A Remix from davos3 nice Project :)
The track itself is 450% (size is approx. 61x107cm) of the original, which is pretty much the maximum for a Bambu Lab P1S. But the height remained at 21mm, for me that's enough.
Originally it was attached to the wall with “pins” and double-sided tape.
Because of the extra weight, I don't think this will hold, so I designed and remixed a wall mount for screws with the original "pins", including a drilling template.
The "pin mount" is inserted into the back of the track as in the original (if necessary, use a little sandpaper) and glue it in place, i used six of them.
Simply clip the drilling template onto the Brackets and slide it onto the "pin-mounts", use a bit of double-sided tape and align everything to the wall.
When removed, the drilling template should remain stuck to the wall. :)
Drill holes, attach the wall mount with screws and align it with the opening upwards, hang in the Nordschleife - enjoy! :)
I used a Govee RGBIC LED strip.
You can adjust the printer settings as you wish.
I printed with a little more infill to make it more stable, but less should work too.
I printed the wall mount in PETG for more stability.
| 01.stl | 346.8KB | |
| 02.stl | 81.5KB | |
| 03.stl | 72.0KB | |
| 04.stl | 200.5KB | |
| 05.stl | 123.9KB | |
| 06.stl | 38.2KB | |
| 07.stl | 206.1KB | |
| 08.stl | 197.2KB | |
| 09.stl | 101.8KB | |
| 10.stl | 51.4KB | |
| Drill_template_for_Mount.stl | 131.1KB | |
| Pin_Mount_02.stl | 197.4KB | |
| Wall_Mount_for_drill_template.stl | 73.6KB |
