MyMiniPC 3D Printer Model
The file 'MyMiniPC 3D Printer Model' is (ttf,scad,stl) file type, size is 961.5KB.
The file 'MyMiniPC 3D Printer Model' is (ttf,scad,stl) file type, size is 961.5KB.
Used as WebMonitor for FRITZ!Box-Routers
Source on Github: https://github.com/w4b-zero/ESP8266-WebMonitor (fork from the great software from Joerg-66 https://github.com/Joerg-66/ESP8266-WebMonitor !)
created with OpenSCAD
monitor tft v1 and v2: front side has to be pressed into the back side with a little pressure - it just fits in and is so tight that no glue is needed.
computer case_v1: top and bottom glued with superglue.
computer case_v2: top, back and bottom glued with superglue.
side part can be easily clamped on without glue.
glue the power supply carefully after clamping the side part. (make sure it is in the right position so that the side part fits and the power supply is properly attached to the side part!)
connection monitor & computer: connection holes for 5x2 pin headers.
power connection: monitor powered directly from nodemcu/pcb.
computer case for the nodemcu has a connection hole that leads directly to the microUSB connection of the nodemcu. Computer case for the pcb has a connection hole in the power supply area, which has an inner area for a microusb breakout board.
Update: 28.July.2024
-correct wrong Filenames
-delete wrong Files and add the right Files
-add my first Design (Version V1)
| Computerfont.ttf | 38.2KB | |
| crt_monitor_tft_backtest.scad | 1.7KB | |
| keyboard.scad | 5.0KB | |
| keyboard.stl | 83.3KB | |
| monitor_tft_v1.scad | 3.4KB | |
| monitor_tft_v1_back.stl | 76.8KB | |
| monitor_tft_v1_front.stl | 292.9KB | |
| monitor_tft_v1_holder.stl | 188.6KB | |
| monitor_tft_v1_stand.stl | 38.0KB | |
| monitor_tft_v2.scad | 4.0KB | |
| monitor_tft_v2_back.stl | 63.0KB | |
| monitor_tft_v2_front.stl | 340.1KB | |
| monitor_tft_v2_holder.stl | 188.6KB | |
| monitor_tft_v2_stand.stl | 38.0KB | |
| mouse.scad | 978.0B | |
| mouse.stl | 358.9KB | |
| rechner_v1.scad | 6.9KB | |
| rechner_v1_case.stl | 478.4KB | |
| rechner_v1_case_bottom.stl | 431.9KB | |
| rechner_v1_case_side.stl | 29.1KB | |
| rechner_v1_case_top.stl | 54.0KB | |
| rechner_v2.scad | 12.8KB | |
| rechner_v2_case_nodemcu_back.stl | 321.2KB | |
| rechner_v2_case_nodemcu_bottom.stl | 218.1KB | |
| rechner_v2_case_nodemcu_seite.stl | 38.1KB | |
| rechner_v2_case_nodemcu_top.stl | 63.4KB | |
| rechner_v2_case_pcb_back.stl | 335.0KB | |
| rechner_v2_case_pcb_bottom.stl | 162.7KB | |
| rechner_v2_case_pcb_seite.stl | 38.1KB | |
| rechner_v2_case_pcb_top.stl | 80.5KB | |
| rechner_v2_netzteil_nodemcu.stl | 684.0B | |
| rechner_v2_netzteil_pcb.stl | 1.4KB |
