Enclosed Grow chamber for many types of mushrooms. Includes lighting, humidity and fresh air controls:

Grow Chamber: Put holes near bottom and glue/reinforce with 3D Parts
https://www.homedepot.com/p/Sterilite-116-Qt-Ultra-Storage-Box-19908604/204725029

Humidifer Tote: (Spray Paint Black to impede algae)
https://www.amazon.com/gp/product/B019994XVY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Fogger Float:
https://www.thingiverse.com/thing:3219313

Daylight LEDs: (Hot Glue to underside of lid)
https://www.amazon.com/gp/product/B00YXBEHQK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Blue Light LEDs: (Hot Glue to underside of lid)
https://www.amazon.com/gp/product/B00Q9M33W0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

DHT Sensor: (Only leave in bin for short durations)
https://www.amazon.com/gp/product/B01DKC2GQ0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Fogger: (Place inside of humidifier tote)
https://www.amazon.com/gp/product/B00PAK21WU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Controller: (Need to build yourself using code as a reference)
Programmable Relay Enclosure:
https://www.thingiverse.com/thing:4182286

Humidifier Fan: (Affix to top of humidifier using mounting shield and plate)
12V 30mm Fan (recommend water resistant)

FAE:
12V, 80mm Fans (Mount to top using 3D Printed Grilles)

Lots of Solder, wire, and heat shrink tubing.

Assemble as shown in photos
I used the 5/12V power supply but added an additional 24V supply for the fogger that shares a ground, so there are effectively 2 power inputs to the controller, giving the following voltages 0/5/12/24V.
There are 9 lines from the controller that feed through the top of the tote

Sensor (5V)
Sensor Signal (5V)
Blue Light Pwr (12V)
White Light Pwr (12V)
FAE Fan power (12V)
Humidifier Fan Power (12V)
Fogger Power (24V)
System Ground (0V)