Here are some videos that explain the system I came up with for leveling my build plates... And easily get layers down to 0.05mm
With dual extruder
https://www.youtube.com/watch?v=QyBRybhaCYc
0.05mm with makerbot
https://www.youtube.com/watch?v=kgRw6YSmsUI
| Dual_ABS_01mm.x3g | 3.1MB | |
| Dual_ABS_02mm.x3g | 1.6MB | |
| Dual_ABS_03mm.x3g | 1.1MB | |
| Dual_PLA_01mm.x3g | 3.1MB | |
| Dual_PLA_02mm.x3g | 1.6MB | |
| Dual_PLA_03mm.x3g | 1.1MB | |
| FF_PT_InnerRectangle.stl | 30.3KB | |
| FF_PT_OuterRectangle.stl | 30.3KB | |
| Left_ABS_01mm.x3g | 1.6MB | |
| Left_ABS_02mm.x3g | 819.3KB | |
| Left_ABS_03mm.x3g | 573.8KB | |
| Left_PLA_01mm.x3g | 1.6MB | |
| Left_PLA_02mm.x3g | 1.6MB | |
| Left_PLA_03mm.x3g | 573.8KB | |
| MB_PerimeterTest.stl | 36.8KB | |
| MB_PerimeterTest_005mm.x3g | 3.8MB | |
| MB_PerimeterTest_01mm.x3g | 1.9MB | |
| MB_PerimeterTest_02mm.x3g | 790.0KB | |
| MB_PerimeterTest_03mm.x3g | 586.5KB | |
| Right_ABS_01mm.x3g | 1.6MB | |
| Right_ABS_02mm.x3g | 819.3KB | |
| Right_ABS_03mm.x3g | 573.8KB | |
| Right_PLA_01mm.x3g | 1.6MB | |
| Right_PLA_02mm.x3g | 819.3KB | |
| Right_PLA_03mm.x3g | 573.7KB |
