I have a Beelink Mini S 12 Pro computer.
It is tiny. I use it to run my tiny 3018 cnc machine. Its a router and a laser engraver/cutter.
My cnc machine sits on a wire shelf cart.
I designed this bracket so I can hang this tiny pc on the front of the wire rack cart.
If you notice the fan in the picture, I think this mini PC was meant to lay flat. Since I am changing the orientation and hanging it vertically I wasn't sure how the air would flow so I added my own fan. Its just a 4010 fan running on 5vdc. I made a cable for it and plugged it into a spare usb port.
There are 2 threaded holes in the bottom of my tiny pc. They take 3mm’s screws.
The 2 holes are 35mm’s apart center to center, and about 6mm’s from the edge.
I used 2 socket head cap screws 3mm X 8mm long to bolt the bracket to the pc.
I added my own support to the slot opening. No other supports or brims are necessary. Trim away post print.
Printed in ABS .2 layer - 25% infill – printing a little slow at 28mm’s per sec. Quality over quantity.
| Beelink_hanger.stl | 15.9KB |
