Mussy X-Bow Dual Band Mod 3D Printer Model
The file 'Mussy X-Bow Dual Band Mod 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Mussy X-Bow Dual Band Mod 3D Printer Model' is (stl) file type, size is 2.5MB.
Work in progress, untested, But currently printing to try within the next few days.
Will need 4- M6x15
And 2- M6x20
hex headed bolts.
twice as much banding as the original design, instead of using the plastic pieces you slip the band onto, Which is an absolute pain in the rear. You will wet the inside of the band with alcohol and slide it onto the screws up to the head, then pinch that between the arm and the mounting plate and withten, this should help secure them to the bow itself.
Afterwards, use paracord between the two loops of the rubber, making yoiut standard finger pull too. will need approx 300mm bands x2.
| all_pulleys_x16.stl | 2.6MB | |
| Arms.stl | 2.1MB | |
| Band_Caps.stl | 1.2MB |
