As your Munchkin card collection grows, having a way to stack your cards becomes necessary. Six-stack card holder to the rescue! Provides -5 to knocking your cards all over the table.
This WILL fit inside the Munchkin Deluxe box leaving just enough room for the game board. Holds your cards neatly and at an upturned angle for easier curses and treasure gathering.
This prints fine on an Ender-3 (which has an 8inch by 8inch bed, or 220mm by 220mm bed), or anything larger. I originally made a 8 slot model, but it didn't fit on the print bed.
Use standard PLA, PETG or whatever wandering monster filament you use ;)
I've also written these books, also in the snarky Munchkiny D&D style https://smile.amazon.com/Brian-Cary/e/B07PVCL9NF?ref=sr_ntt_srch_lnk_1&qid=1581795107&sr=8-1
PS. This card holder is the perfect size for holding Munchkin cards, not regular playing cards, though you could easily scale it up a pinch in your slicer to hold regular playing cards if you like.
| brians_munchkin_6_Stack_version.stl | 327.0KB |
