I've been experimenting a lot with Vase Mode lately and wanted to make something very useful and easy to print so I came up with these designs. Here are a few things that you can use these designs for:
Plantor
Candy/Sweets Container
Oil/Soap Bottle
Sending love messages the 3D-Printing way ;)
... And a lot more!
To make your bottles sturdy and liquid-proof, you can do the following:
Use thicker nozzle(I printed most of these using 0.6mm ~ 1.2mm layer thickness using 0.6 & 0.8 nozzles)
Add more bottom layers (5~7 should work for most)
Increase your flow percentage or extrusion multiplier
The following materials were used to produce these prints:
Sainsmart light wood
Colorfabb Trans Green
Fillamentum Crystal Clear Iceland Blue
Fillamentum Timberfill Cinnamon
Makergeeks FDA approved Trans
Tops/covers printed in Colorfabb NGEN_FLEX
If you like these prints, please consider liking and commenting. If you print and use these bottles, make sure to share your work! I'd love to see what you do with these models!
If you like my work consider supporting me by purchasing one of my models from My Mini Factory or Cults3D:
https://www.myminifactory.com/users/Abdullah_Dar
https://cults3d.com/en/users/aad345/creations
UPDATE 11/4/2018
There seems to be some missing files for whatever reason. I re-uploaded them and the complete set is there. There are two top covers since the bottles have different opening size.
| Potion-1-2-3-4-5_Top.stl | 1.7MB | |
| Potion-1.stl | 3.3MB | |
| Potion-2.stl | 3.2MB | |
| Potion-3.stl | 2.6MB | |
| Potion-4.stl | 3.5MB | |
| Potion-5.stl | 3.2MB | |
| Potion-6.stl | 2.6MB | |
| Potion-6_Top.stl | 1.7MB |
