Multiple Print Irish Tin Whistle In D 3D Printer Model
The file 'Multiple Print Irish Tin Whistle In D 3D Printer Model' is (stl) file type, size is 437.5KB.
The file 'Multiple Print Irish Tin Whistle In D 3D Printer Model' is (stl) file type, size is 437.5KB.
Remix of the popular "Single print irish Tin Whistle in D" to accommodate smaller printers. I would still recommend printing vertically and with the mouthpiece at the top,10pc infill, 0.28 layer height, no supports and a nice big brim to aid adhesion.
I have included three different joiners to help you to find a snug fit. This is the only part that will need support to print. Also recommend that you glue (and perhaps tape) to get a good air seal. Make sure that the whistle parts are full inserted (8mm) into the joiner and that no glue gets into the internal pipe of the whistle. If you want a good sound this internal cylinder profile needs to be very smooth.
Enjoy!
| Join_-_loose.stl | 155.4KB | |
| Join_-_standard.stl | 155.4KB | |
| Join_-_tight.stl | 155.2KB | |
| Whistle_-_lower.stl | 500.0KB | |
| Whistle_-_upper.stl | 279.7KB |
![[OLD VERSION] Sopranino Folk Whistle 3D Printer Model](https://res.3axis.co/9dab99f9-e1f2-400d-8b2b-4b586f16c09d/images/ce001206-addb-4c45-8728-a0473a9ee4a4_thumb.jpg)
![Customizable Plectrum ([guitar] Pick) 3D Printer Model](https://res.3axis.co/9a53e487-c349-402a-a587-2ffa375bc090/images/4a54637d-17dd-4f05-8622-caa3dda3ff4f_thumb.jpg)
