Multicolor cell model redesigned for monocolor printers

This model has been adapted from the original one that has been designed for Palette. Unfortunately it's almost impossible to print it correctly without touhing parts and adapting colors

Take a look at the original design here Multi-Color Cell Model

• A-Centriole : Reoriented part, no need to flatten it, centered
• B-Nucleous : Reoriented part, no need to flatten it, centered
• C-Nucleolous : Reoriented part, no need to flatten it, centered
• D-Golgi : Reoriented part, no need to flatten it, centered
• E-Mitochondrion-1 : Reoriented part, no need to flatten it, centered (its the taller one)
• F-Mitochondrion-2 : / 0.2 nozzle needed ! lack of detail else and fail/bad print. Reoriented part, no need to flatten it, centered (its the smaller one)
• G-Endoplasmic_Reticulum : /.2 nozzle (amy be 0.4 with 80% flowrate), need to be very thin to fit actual design (working on)
• H-Outer : Removed endoplasmic reticulum shape from the mesh, become useless. Reoriented part, no need to flatten it, centered (-15% print time / original)
• I-Lysome : Two of them needed to be cliped as original, best for well fiting. Third is to stick. Reoriented part, no need to flatten it, centered
• J-Inner-1 : Inner cut in twice, this is part one. Reoriented part, no need to flatten it, centered (working on)
• K-Inner-2 : Inner cut in twice, this is part two. Reoriented part, no need to flatten it, centered (working on)