This switch design requires a 6mm momentary push button switch and 4 3mm leds.
I needed a needed a momentary switch that had 4 ack/state feedback indications so this was made. LEDs could always be wired up or configured how ever is needed, easy to set up with something like an arduino.
I printed top, bottom, and ring in black and then printed the button in clear, maybe white would work - or a thin layer or two of white with the rest clear. Switch is pressed into/onto bottom facing inner so the button will press down on it and leds are inserted from the bottom so they protrude into the switch body.
Have fun.
| switch2-button.STL | 388.6KB | |
| switch2.1-bottom.STL | 469.0KB | |
| switch2.1-lockingring.STL | 771.0KB | |
| switch2.2-top.STL | 230.2KB |
