Update: Added MLS_12mm.STL for two layers and MLS_24mm.STL for a single layer.
This is the second of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and five of the push buttons from my Arcade push button collection.
I included them here with this design so you don't have to go searching for them.
There are a lot of colour combinations I would like to try with the layers, like black and gold, all pastels or even a sunset one if its possible to get the different shades of filament.
Print the bolts on their heads and if the balltop gives you issues, stick it on a raft.
Wiring could still be to a single D9 with up and down buttons (or left and right for Track & Field) and a couple of fire buttons but they are wasted really unless you utilise two ports on a C64 or go for a RP2040 and drag & drop some files onto it ( https://github.com/OpenStickCommunity/GP2040-CE ).
Happy days!
--PATREON & PATREON SHOP.
--https://www.patreon.com/3DFreeman
Thanks for your continued support!
| B_But.stl | 107.3KB | |
| B_But2.stl | 99.7KB | |
| B_Case.stl | 193.2KB | |
| B_Case2.stl | 197.0KB | |
| J_Ball.stl | 737.5KB | |
| J_Base.stl | 152.5KB | |
| J_Joint.stl | 126.4KB | |
| J_Skirt1.stl | 50.1KB | |
| J_Skirt2.stl | 50.1KB | |
| J_Stem.stl | 162.6KB | |
| J_Top.stl | 142.8KB | |
| MLS_12mm.stl | 131.3KB | |
| MLS_24mm.stl | 131.3KB | |
| MLS_4mm.stl | 131.3KB | |
| MLS_8mm.stl | 131.3KB | |
| MLS_Base.stl | 1.3MB | |
| MLS_Top.stl | 549.1KB | |
| ML_Screw.stl | 549.4KB |
