Multi Color Kirby! [4 Colors] 3D Printer Model
The file 'Multi Color Kirby! [4 Colors] 3D Printer Model' is (stl) file type, size is 7.7MB.
The file 'Multi Color Kirby! [4 Colors] 3D Printer Model' is (stl) file type, size is 7.7MB.
Watch the video here: https://youtu.be/AC3vXYKbCAc
Edit: I had a request to add a fifth color. Because if you look at Kirby's eyes, there's a little bit of blue in there. I didn't know there was a way to print 5 colors, but I guess there is lol. So I've added two files to make that possible. They're blue and black and the files have "5Color" on the end of them. So you don't need those if you're only doing 4 colors.
I usually use my Kirby model as a first test print on most of my machines, so I figured as a good first test of the MMU, I should do Kirby!
So this Kirby is printed in 4 colors at once and is not painted at all. I'll list the filaments I used below to get the correct colors. And I did have some issues with the black bleeding into the pink. I landed on 80mm wide and 30mm deep per color. And that seemed to do the trick.
I have plans for a few more things coming soon on this MMU. Let me know what you guys would like to see. :)
Printers: Prusa i3 MK2S with MMU
Filament:
Inland PLA "Pink"
Fillamentum PLA "Signal Red"
Fillamentum PLA "Traffic Black"
Fillamentum PLA "Traffic White"
Layer Height: 0.15mm
Supports: No
Modeled in Fusion 360
| MM_Kirby_Black.stl | 1.1MB | |
| MM_Kirby_Black_5Color.stl | 1.2MB | |
| MM_Kirby_Blue_5Color.stl | 204.6KB | |
| MM_Kirby_Pink.stl | 4.8MB | |
| MM_Kirby_Red.stl | 9.0MB | |
| MM_Kirby_White.stl | 1.3MB |
