This is yet another 2020 dumpster fire model. It has colored text and wheels!

It's designed to print easily with no supports (all overhangs are ≤30°), and all tolerances are 0.3 mm. If you find that things don't quite fit, try increasing the size of just the dumpster slightly when you print it.

There are 3 versions of the dumpster:

• Single color: The dumpster and 2020 label are printed as a single part (single-color-dumpster.stl)
• Multi-color: There are separate STLs for the text and dumpster. Print each and glue them together. (multi-color-dumpster.stl and multi-color-2020.stl)
• MMU: A version for printing the text embedded in the dumpster (originally designed for the Prusa MMU2S). Print the two parts together. (mmu-dumpster.stl and mmu-2020.stl)

There are also 2 versions of the fire. One with a hole for hanging (fire-with-hole.stl) and one without a hole (fire-without-hole.stl). Note that the fire has directionality (it will only fit in the dumpster one way.) By default, it's oriented to print with the front face down. If you like the look of your printer's top face better, just flip it over when you print.

You will also need to print one set of wheels (wheels.stl). There are insets in the bottom of the dumpster that they fit into.

When you've printed all the parts, simply assemble it with super glue and hang it for everyone to enjoy. Or give it away so someone else can have a permanent reminder of this dumpster fire year.

This is also available on PrusaPrinters.

This is heavily based on this 2020 Dumpster Fire Ornament by AtomKemp, though remade from scratch. (I tried to list this as a remix, but Thingiverse is failing at that.)