Remix of Magic the Gathering Library and Graveyard Organizer by fluffygryphon at myminifactory.com.
https://www.myminifactory.com/object/3d-print-magic-the-gathering-library-and-graveyard-organizer-36292
Made to fit 100 (Dragon Shield) sleeved cards.
Has indents in the bottom so that you can grip all gards at the same time.
Slightly downwards tilted so that cards don't risk falling out, and has a small lip at the bottom so that you can put cards on the bottom of your library without lifting them all out, though I'd recommend smoothing the ridge with sandpaper if you intend to do this, as your cards might otherwise catch on it!
Please note that the LibraryandGraveyard60/100 are a very tight fit for the cards, and if you want more than a about half a millimeter of playroom on each side, I recommend printing at one or two percent larger scale! The LibraryandGraveyrad100 - with clamp is a tad wider.
If you really want a version for unsleeved cards, let me know and I'll mix you one up :)
(Disclaimer: I do not endorse the heresy that is playing with unsleeved cards, and this is not meant as encouragement for you rogues who do. Be responsible, use protection.)
| LibraryandGraveyard100.stl | 25.8KB | |
| LibraryandGraveyard100_-_with_clamp.stl | 3.0MB | |
| LibraryandGraveyard60.stl | 25.8KB |
