The file 'MTB Bike Stand 3D Printer Model' is (stl) file type, size is 1.4MB.
There are two versions of the bike stand. 26 inch and 29 inch for up to 2,25 inch wide tires. Maybe i will add a version for 27,5 inch tires.
You need pipes or rods with a diameter of 16 mm.
Length:
2 x 305 mm
2 x 720 mm
2 x 190 mm
For the clamps you need:
16 x DIN912-M5x16 screws
16 x DIN985-M5 lock nuts
I printed the large feet parts (300 mm in length) on a Ender-3 by aligning them diagonal on the print bed.
I recommend to print the clamps in PETG. If you print them in PLA, they will loose tension over time due to the high tendency of PLA to creep. For the large structural parts, PLA is fine.
Clamp.stl | 147.2KB | |
Foot_AFT_26x225.stl | 546.7KB | |
Foot_AFT_29x225.stl | 547.1KB | |
Foot_FWD_26x225.stl | 409.4KB | |
Foot_FWD_29x225.stl | 417.0KB | |
Top_26x225.stl | 655.5KB | |
Top_29x225.stl | 624.6KB | |
Y-Branch.stl | 1.0MB |