Mr. Owls Ender 3-V3 KE Filament Guide Mount 3D Printer Model
The file 'Mr. Owls Ender 3-V3 KE Filament Guide Mount 3D Printer Model' is (STL) file type, size is 61.1KB.
The file 'Mr. Owls Ender 3-V3 KE Filament Guide Mount 3D Printer Model' is (STL) file type, size is 61.1KB.
Needed to move the filament roll from the top to the bottom to help with vibrations. Wanted a filament guide that could feed from either side of the printer (from dry box [left side], or spool holder [right side]).
Parts list:
2x 608-2RS Ball Bearings 8x22x7mm - https://www.amazon.com/gp/product/B07R11PBZ8
For the mounting screws I had a couple of extra M5x15mm VESA mounting screws leftover from my monitor stands. If you don't have those:
2x M5x15mm screws - https://www.amazon.com/MonsterBolts-Socket-Screws-Alloy-Steel/dp/B079RKX99K
If using threaded inserts:
2x 1/4"-20 x 1/2" long screws - https://www.amazon.com/dp/B07QH511ZB
2x 1/4" Washers - https://www.amazon.com/Stainless-Washer-Outside-Diameter-Washers/dp/B08V5MJCX3
2x 1/4"-20 threaded inserts - https://www.amazon.com/Threaded-M8-Brass-Nuts-Metric-Nuts-Insert-Components/dp/B0CNWJ751C
| 0.250-Washer.STL | 21.2KB | |
| 8mm-Washer_20241007.STL | 22.0KB | |
| Ball_Bearing_Roller_20241007.STL | 141.3KB | |
| Ball_Bearing_Shaft_202241007.STL | 22.0KB | |
| Bearing_Spacer_20241007.STL | 21.6KB | |
| Filament_Guide_Mount_20241007.STL | 37.8KB |
