MPSCARA: Mostly Printed SCARA Robot 3D Printer Model

Author: @
License: CC BY
File formats: stl,pdf,zip
Download type: zip
Size:7.2MB

The file 'MPSCARA: Mostly Printed SCARA Robot 3D Printer Model' is (stl,pdf,zip) file type, size is 7.2MB.

Summary

Introducing the MPSCARA!

UPDATE: This project is no longer being supported. A more-evolved version of this concept with a more active support team is available here.

WARNING: This project is still a work in progress, we cannot promise that it will run as well as intended, but are committed to helping everyone get their machines operating as smoothly as possible. It still requires a lot of polish, but we will be continuing with our updates as we produce them. Thank you for your patience, please comment or message with any issues you run into while building/using your MPSCARA and we will do our best to help!

This is a SCARA robotic arm designed to be a cheap, compact, and easy-to-build 3D printer. It can also be equipped with a marker (An older version of the MPSCARA using a marker can be found here), with further tools potentially on the way. It is heavily based off Idegraaf's design, with some quality-of-life updates added in.

If you are interested in building one yourself, download the three zip files crack them open. They contain:

  • V1.X Marlin - Preconfigured marlin firmware for your MPSCARA V1
  • V1.X Software - A Python-based gcode conversion script, complete with usage instructions and comments.
  • V1.X STL Files - A full repository of STL files needed to build your very own MPSCARA V1.x

You will also want to download the following:

  • Bill of Materials V1.X - In excel and pdf formats, complete with prices and links to where the components may be purchased. Note: Most hardware will be available at nearby hardware stores, and likely sold in lower bulk than online, I strongly suggest you check those locations first to get better deals.
  • MPSCARA Instructions V1.X - Also known as a process plan or construction instructions, this tells you exactly how to build, wire up, and install the firmware onto your MPSCARA.

As the file names imply, each distinct component has its own version number. If any issues are encountered, or any clarifying questions arise, the files will be updated along with notes on this page to indicate what was changed and why (Along with version increments on the related files). That being said, please comment on here or PM me with questions or suggestions for this project.

Special thanks to Professor Mark Ganter for guidance, Ashley Pigott for testing and proof-reading, the Spring 2018 Class of ME 480 at UW for testing, and Molly Carton for advice.

The MPSCARA was designed, built, and tested in the Solheim Additive Manufacturing Lab at the University of Washington.

2mm_Spacer_V1.stl 69.2KB
5mm_Spacer_V1.stl 85.0KB
8mm_Coupler_By_toxnico_V1.stl 154.2KB
Baseplate_V1.2.stl 1.6MB
Bill_of_Materials_V1.pdf 349.5KB
Endstop_Clip_V1.stl 620.9KB
Forearm_V1.stl 580.1KB
Gear_V1.stl 226.3KB
Hand_V1.stl 429.2KB
Linear_Bearing_V1.1.stl 190.8KB
Lower_Upper_Arm_V1.stl 203.7KB
Motor_Holder_and_Z_Endstop_V1.stl 223.4KB
MPSCARA_Instructions_V1.pdf 936.6KB
Upper_Upper_Arm_V1.stl 816.2KB
V1.2_Software.zip 230.4KB
V1.2_STL_Files.zip 2.0MB
V1_Marlin.zip 2.1MB
Wrist_V1.stl 272.6KB
Z_Carriage_Bottom_V1.1.stl 543.8KB
Z_Carriage_Bottom_V1.stl 548.1KB
Z_Carriage_Top_V1.stl 739.4KB