MPCNC (Updated Version) Router Mount And Dustshoe 3D Printer Model
The file 'MPCNC (Updated Version) Router Mount And Dustshoe 3D Printer Model' is (stl) file type, size is 739.1KB.
The file 'MPCNC (Updated Version) Router Mount And Dustshoe 3D Printer Model' is (stl) file type, size is 739.1KB.
This is a CNC spindle motor attachment for the Mostly Printed CNC 525 (Updated 5/25/16).
The spindle is a high quality CNC Spindle Motor 400W ER11 & Mach3 PWM speed controller + Mount Engraving Kit which you can purchase on eBay http://www.ebay.com/itm/261878403099?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
You will need a 48 volt power supply to power the spindle.
http://www.amazon.com/SMAKN%C2%AE-Regulated-Switching-Supply-Quality/dp/B0113JHSRO?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
The spindle holder sports a removable dust shoe which is held in place with magnets which you can get from Harbor Freight. The magnets are 8mm in diameter and 2mm in depth. You will need 2 packages.
http://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html
You will also need some 6-32 screws and nuts to complete the assembly.
I have also created a power supply mount and case for the spindle controller as well as a power supply case for the 12 volt supply.
The 12 volt supply case is here... http://www.thingiverse.com/thing:1597933
The 48 volt supply case and spindle controller case is here...
http://www.thingiverse.com/thing:1613608
I also extended my tool holder by 2 inches to raise it to better fit the spindle.
http://www.thingiverse.com/thing:1613734
EDIT: 6/18/2016 Added top version for the original MPCNC machine. I have no way to test this since I built the updated version, but I adapted this from another mount.
| DustShoeBottom.stl | 242.4KB | |
| DustShoeTop_fixed.stl | 771.5KB | |
| OriginalMPCNC_DustshoeTOP.stl | 1.3MB |
