A wildly experimental prototype modular mounting system for the MPCNC power supply and RAMPS 1.4, volts/amps meter panel (blinky lights and such), laser driver and a Raspberry Pi 2 Model B (AstroPrint/Octoprint).
Everything is modular and I'm including STEP files to make it easy to modify in case you want to use it for something else.
Seriously down the rabbit hole on this one in case you hadn't noticed. The upside is, it works.
| hexagon_155sq.pdf | 19.9KB | |
| mm_2dot8w_laser_driver.stl | 757.8KB | |
| mm_2dot8w_laser_driver.stp | 286.4KB | |
| mm_emt_locks.stp | 151.3KB | |
| mm_emt_locks_end.stl | 622.4KB | |
| mm_emt_locks_mid.stl | 55.9KB | |
| mm_pi_upper.stl | 216.7KB | |
| mm_pi_upper.stp | 117.3KB | |
| mm_ps_40x100x165_lower.stl | 428.4KB | |
| mm_ps_40x100x165_lower.stp | 122.1KB | |
| mm_ps_40x100x165_upper.stl | 400.9KB | |
| mm_ps_40x100x165_upper.stp | 104.0KB | |
| mm_ramps1dot4_pi_lower.stl | 475.4KB | |
| mm_ramps1dot4_pi_lower.stp | 211.4KB | |
| mm_ramps1dot4_pi_upper.stl | 469.8KB | |
| mm_ramps1dot4_pi_upper.stp | 119.4KB | |
| mm_ramps1dot4_pi_upper_lcd.stl | 472.0KB | |
| mm_ramps1dot4_pi_upper_lcd.stp | 125.9KB | |
| mm_rrdsc_cover.stl | 626.3KB | |
| mm_rrdsc_cover.stp | 233.0KB | |
| mm_rrdsc_support.stl | 805.8KB | |
| mm_rrdsc_support.stp | 152.5KB | |
| mm_va_meters.stl | 413.7KB | |
| mm_va_meters.stp | 110.1KB |
![[Updated] Tom’s Easy Spool Holder With 8mm Rod For Prusa I3 MK2 (or Plus) V3 3D Printer Model](https://cdn.3axis.co/assets/14/36/e6/29/1436e629-3c20-4221-8e7f-37c32896f2f3/images/830c7e8c-6eef-4d2d-84be-d4d09f2a00b0_thumb.jpg)
