Mouth And Eye Brow Mechanics, Adaptable To Eye Mechanics 3D Printer Model
The file 'Mouth And Eye Brow Mechanics, Adaptable To Eye Mechanics 3D Printer Model' is (stl,stp) file type, size is 15.8MB.
The file 'Mouth And Eye Brow Mechanics, Adaptable To Eye Mechanics 3D Printer Model' is (stl,stp) file type, size is 15.8MB.
Mouth and eye brow mechanics adaptable to eye mechanics (https://www.thingiverse.com/thing:2781756). Ready to be included into a soft fabric puppet head. The Thing has small holes where the fabric can be sewed on.
The Mechanics allow the following movements:
Eye brows can be moved independently.
Mouth movement open and close.
Mouth corners can be moved up and down independently (smiling - frowning)
See video: https://youtu.be/mnbeAe6cOiU and https://www.youtube.com/watch?v=Nz9rR9NwR7k
To get open source software running on a Rasperrry Pi that can drive the servos in a puppet, visit https://bechele.de/?page_id=70
The missing parts are published in thing:
https://www.thingiverse.com/thing:2781756
Recently I added two stp files of the complete head for downloading, since I have been asked to provide a CAD file. I added two versions one with and one without servos. The one without Servos is a little smaller.
| connecting_levers.stl | 2.4MB | |
| head.stp | 15.8MB | |
| head3.stp | 28.0MB | |
| Hinge_block.stl | 1.3MB | |
| hinge_frame.stl | 701.5KB | |
| lower_jaw.stl | 12.4MB | |
| neck_plate.stl | 3.0MB | |
| Servo_bar.stl | 2.5MB | |
| servo_plate.stl | 5.2MB | |
| sew-border.stl | 37.9MB | |
| slider.stl | 535.1KB | |
| slider_guide.stl | 93.0KB | |
| throat.stl | 4.4MB | |
| upper_jaw.stl | 11.4MB |
