Mouse Flight Case 3D Printer Model
The file 'Mouse Flight Case 3D Printer Model' is (stl,stp) file type, size is 26.8MB.
The file 'Mouse Flight Case 3D Printer Model' is (stl,stp) file type, size is 26.8MB.
So I wanted to make a small assembly project.... So I made a box for my Mouse of all things.
The Pictures show a Case with logo but there is no logo in the files.
I used M3 threaded inserts and M3 screws for this project.
Button-head screws for everything except for the screw for the locking mechanism. For that I used a countersunk M3.
I believe you can get away with using 8 to 12 mm length for all screws.
If I could remember where I had the screws and inserts from I would post it. But It was something I just had laying around.
| Henge.stl | 693.5KB | |
| Henge.stp | 40.1KB | |
| LockNottom_v3_1.stl | 573.4KB | |
| LockNottom_v3_1.stp | 107.6KB | |
| lockRod.stl | 141.5KB | |
| lockRod.stp | 5.6KB | |
| LockTop_v3.stl | 635.3KB | |
| LockTop_v3.stp | 100.0KB | |
| MouseBoxBottom.stl | 36.5MB | |
| MouseBoxBottom.stp | 526.4KB | |
| MouseBoxTop.stl | 38.5MB | |
| MouseBoxTop.stp | 480.3KB |
