Hi threeD Printers,

This Mouse Bungee attaches to your monitor using strong adhesive tape, eliminating mouse cable tangles and drag while enhancing the cleanliness and fresh appearance of your setup.

It's designed to be partially printed with TPU filament, particularly the cable guide.

Materials Needed

• Thin (≈ 0.2mm) but strong double-sided tape
• TPU Filament Shore 95A or lower hardness

Parts to Print

• cable_guide.stl out of TPU
• One of the mount*.stl files. If your monitor is angled at the bottom, print one of the angled mount*.stl files. For example, for my Dell S3422DWG Monitor, I used the mount_20_degree_tape_cutout.stl.

For dimensions of the part, please refer to the pictures provided.

Assembly

1. Clean the bottom of your monitor to ensure it's grease-free.
2. Cut the double-sided tape and apply it with pressure to the printed mount.
3. Stick the mount to the bottom or side of your monitor and apply pressure to ensure it adheres properly.
4. Route the cable of your mouse through the cutout of the cable guide.
5. Insert the cable guide into the mount while supporting it.

Compatibility

The Mouse Bungee works with any wired mouse with a cable diameter under 6mm. It mounts to the bottom or side of any monitor for a tangle-free experience.

Modification

The design can be easily resized and customized using the provided Fusion360 (.f3d) file.

Happy printing!

Print Settings

mount*.stl

• Rafts: No
• Supports: No
• Resolution: 0.12mm
• Wall Lines: 3
• Infill: 20%
• Filament brand: Prusament
• Filament color: Galaxy Black
• Filament material: PLA

Print the mount on its back (see provided picture) so no supports are needed. Use the Auto Orient Feature of your Slicer.

cable_guide.stl

• Rafts: No
• Supports: No
• Resolution: 0.16mm
• Wall Lines: 2
• Infill: 20%
• Filament brand: Extrudr
• Filament color: Black
• Filament material: TPU 85A

No supports are needed for both files.

Inspired by Pulsar Micro Bungee