Mounting Kit For Regalo Baby Safety Gate 3D Printer Model
The file 'Mounting Kit For Regalo Baby Safety Gate 3D Printer Model' is (stl) file type, size is 438.5KB.
The file 'Mounting Kit For Regalo Baby Safety Gate 3D Printer Model' is (stl) file type, size is 438.5KB.
I designed these clamps to be the exact same as the mounting kit which comes with the "Regalo 2-in-1 Extra Wide Stairway and Hallway Walk Through Baby Safety Gate with Mounting Kit" found on amazon.
This was designed so that you can print the latch to open in whichever direction you need your baby gate to open in. If you need to change the opening direction of the gate, load the file into cura and click the mirror feature and flip the gate to the direction you need.
You will still need the spring screw and washer from the original mounting kit but this can be easily transferred to the 3D printed version.
It is very strong if printed at 100% infill. If the latch does not move as smoothly as the original, add some olive oil or pam spray to the contact points to act as a lubricant.
| Gate_Latch.stl | 131.3KB | |
| Lower_Gate_Holder.stl | 488.4KB | |
| Upper_Gate_Holder.stl | 652.5KB |
