Mounting Case For ESP32-CAM (+ESP32-CAM-MB Board) 3D Printer Model
The file 'Mounting Case For ESP32-CAM (+ESP32-CAM-MB Board) 3D Printer Model' is (stl) file type, size is 168.9KB.
The file 'Mounting Case For ESP32-CAM (+ESP32-CAM-MB Board) 3D Printer Model' is (stl) file type, size is 168.9KB.
This thing combines features from the two things it is a remix of.
Here is an English translation of the description of Der_Erbauer's thing:
This housing is specially designed for the ESP32-CAM module with USB adapter shown.
The buttons on the USB adapter are not exposed.
The camera itself is housed in a 9x9x1mm recess in the housing, so that the focus can be adjusted from the outside. I chose the cutout for the USB connection cable so that a plug measuring 11.5x8mm can also be used.
The two ESP32 modules available to me fit into the housing without any play and are held securely in the housing by the tight-fitting cover.
Light effort is required to close or open the lid, which makes screwing or gluing unnecessary.
This remix removes the clip-in flanges/tabs and associated recesses from that original to make it easier to print. The press fit is good enough without them.
The tab on the bottom (mostly taken straight from https://www.thingiverse.com/fuweissinger's thing) makes this case compatible with the popular Ender 3 camera mounting system by Codemonkey1973 (which was originally designed for a RPi camera).
| ESP32_CAM_Case_-_backplate.stl | 50.3KB | |
| ESP32_CAM_Case_-_box.stl | 501.3KB |
