Mount For Racebox Mini Using Ram Mount Suction Cup – 17° For Rear Window Use 3D Printer Model
The file 'Mount For Racebox Mini Using Ram Mount Suction Cup – 17° For Rear Window Use 3D Printer Model' is (stl) file type, size is 3.1MB.
The file 'Mount For Racebox Mini Using Ram Mount Suction Cup – 17° For Rear Window Use 3D Printer Model' is (stl) file type, size is 3.1MB.
UPDATED: 5/13/24 - Complete redesign. Tweaked for better fit and changed the arm design so it can be printed without supports.
This is a mount for the Racebox Mini using a Ram Mount suction cup base (RAP-224-1U).
This is a remix of another design (thing:6276498). I added a 17° angle so this can be mounted in a rear window and the Racebox will sit flat, negating the need to recalibrate the accelerometer.
I've successfully printed this with PETG and ASA. No need to scale up, in my experience.
You'll need four (4) - 15 mm x 3 mm magnets, adhesive for the magnets, and a Ram Mount suction cup base (RAP-224-1U) for assembly.
This 3d model is not affiliated with Racebox or Ram Mount in any way.
| V4_mount_for_racebox_mini_using_ram_mount_17_degree.stl | 8.3MB |
