2 part mount to attach a CTEK CS Connect U terminal cable connector to a pannel with a 25.4 mm hole.
Fit the left and right part over the CS connector. The cilindric chape of the parts should be at the CTEK connector opening. Assemble the parts 2 mm from the connector front to allow for the clip of the male connector to engage.
The 2 parts are fixed with M3 bolt and nut. The assembly is designed to fit in a 25.4 mm hole and are fixed to a panel again using M3 bolts and nuts.
The design was made to be able to easily connect a CTEK trickle charger to a generator to increase battery life.
| CTEK_socket_panel_mount_left.stl | 117.6KB | |
| CTEK_socket_panel_mount_right.stl | 126.7KB |
