Parts list in Learn Guide:
https://learn.adafruit.com/mount-for-crickit/
3D Printed Mount for CRICKIT
Do you want to secure the CRICKIT board to your project? Then this mount is for you! This 3D printed mount is a general, multi-purpose mount designed to house the CRICKIT PCB with M3 machine screws. It features slots for attaching to surfaces and things. The low-profile design has openings for all of the various ports and terminal blocks allowing room for cables and wires.
Add-On Attachments
The mount is designed to fit various add-ons like for tripods and battery packs. The center of the mount allows for these add-ons to snap fit and lock. So you can swap out different add-ons without having to use additional hardware. This allows the mount to be reused. You can also design your own custom add-ons!
Adafruit CRICKIT for Circuit Playground Express
https://www.adafruit.com/product/3093
Circuit Playground Express
https://www.adafruit.com/product/3333
4 x AA Battery Holder with 2.1mm Plug and On/Off Switch
https://www.adafruit.com/product/3788
| crickit-3x-battery.stl | 134.7KB | |
| crickit-3XAA-BC3AAW.stl | 133.5KB | |
| crickit-4x-battery.stl | 62.2KB | |
| crickit-lego-stud.stl | 405.6KB | |
| crickit-lego-tube.stl | 477.4KB | |
| crickit-pcb-outline.dxf | 4.2KB | |
| crickit-pcb-outline.svg | 2.9KB | |
| crickit-tripod-addon.stl | 330.0KB | |
| mount-crickit-inserts.stl | 370.7KB | |
| mount-crickit-noinserts.stl | 367.6KB | |
| ttmotor-lego-mount-studs.stl | 181.1KB | |
| ttmotor-lego-mount.stl | 32.6KB |
