Update 04.15.2021:
Added a new version of the coupling with a removable link element. The link is designed to allow the buffers of the locomotive and the car to be clear of each other, what means that given the smallest radius of turns (500 mm) it needs to be fairly long, leaving a considerable gap between the buffers when going straight. But I guess most model railways have this in common. Possibly, in the future, I will update this with a better solution.
I also added the non-functional versions of the coupling and of the hose connectors (falsely named cable connectors in the previous version), from the non motorized version, for those who want to operate the locomotive without cars. I removed the lose connector parts as they were simply too tiny and there was no way to actually connect them to the connectors, so I have given up on the hoses altogether, for now.
This is a motorized cut-up version of the T01 by Ymrich Industries Co. optimized for printing.
For a video of the thing in action, please visit: https://youtu.be/PBzcjK9CzqU
For assembly instructions, please refer to the PDF and the two m3f files (MS 3D Builder).
I have successfully printed, assembled and tested this model. A number of parts will need slight adjustments done with a modelling knife, though.
The locomotive is designed for my 35mm-gauge railway system. Despite of this, unless assembled with utmost precision (that also goes for the tracks), the locomotive, due to its three-axle design, may have difficulty staying on track in the 500mm-radius turns. I will be soon releasing wider-radius curved tracks.
Please note that, as of yet, the locomotive does not have a working coupling system. It is under development and will be released once tested. Nevertheless, you can print the machine as is, and glue on the coupling later.
Enjoy!
Ymrich Industries is an imaginary industry giant with its headquarters in Kocourkov. It focuses mainly on the production of all sorts of vehicles and means of transportation and accessories. It was founded in the late seventies and since, it grew at an exponential rate. It is estimated to control over 60 percent of the imaginary transportation market in the imaginary world.
The T01 (or T301, the 3 designating the number of powered axles) is the very first diesel-electric locomotive made by Ymrich Industries and was a great success, its characteristic appearance impressing itself upon the pliable young minds of countless boys, who would later in their lives become very nostalgic for this machine.
| Assembly_Instructions.pdf | 9.0MB | |
| Body_Assembly_Instruction_Ignore_Chassis.3mf | 13.1MB | |
| Chassis_Assembly_Instruction.3mf | 4.5MB | |
| Train_CouplingMk3.stl | 249.6KB | |
| Train_CouplingMk3_Link.stl | 282.4KB | |
| Train_Hose_Connector_NoHose_Part.stl | 75.4KB | |
| Train_Hose_Connector_Realistic_Cosmetic.stl | 102.6KB | |
| YT01_Axle_Mk3.stl | 123.7KB | |
| YT01_Axle_Spacer30.stl | 84.1KB | |
| YT01_Axle_Spacer31.stl | 84.1KB | |
| YT01_Axle_Sprocket.stl | 22.2KB | |
| YT01_Buffer_Plate3.stl | 526.8KB | |
| YT01_Buffer_Spring_Section.stl | 459.4KB | |
| YT01_Cabin.stl | 2.6MB | |
| YT01_Cabin_Crown.stl | 1018.1KB | |
| YT01_Cabin_Roof_Bracket.stl | 258.1KB | |
| YT01_Cassis_Inner_L4.stl | 6.4MB | |
| YT01_Cassis_Inner_R4.stl | 6.4MB | |
| YT01_Chassis_Cabin_Ladder.stl | 15.5KB | |
| YT01_Chassis_Coupling_Impact_Protector.stl | 67.8KB | |
| YT01_Chassis_Outer_Mk4.stl | 1.0MB | |
| YT01_Chassis_Pilot.stl | 1.6MB | |
| YT01_Chassis_Pneumatic_Pipe_Long.stl | 48.9KB | |
| YT01_Chassis_Pneumatic_Pipe_Medium.stl | 38.1KB | |
| YT01_Chassis_Pneumatic_Pipe_Short.stl | 26.6KB | |
| YT01_Chassis_Sand_Dispenser_L.stl | 35.0KB | |
| YT01_Chassis_Sand_Dispenser_R.stl | 35.2KB | |
| YT01_Drive_Shaft.stl | 23.3KB | |
| YT01_Drive_Shaft_Screw.stl | 163.0KB | |
| YT01_Drive_Shaft_Sprocket.stl | 13.4KB | |
| YT01_Engine_Cover_Front_Mk2.stl | 4.5MB | |
| YT01_Engine_Cover_Front_Top_Bracket.stl | 33.4KB | |
| YT01_Engine_Cover_Rear_Mk2.stl | 1.8MB | |
| YT01_Engine_Cover_Rear_Top_Bracket.stl | 17.2KB | |
| YT01_Engine_Cover_Top_Front.stl | 373.1KB | |
| YT01_Engine_Cover_Top_Rear.stl | 158.9KB | |
| YT01_Exhaust_Cover_Cabin_Interior.stl | 42.4KB | |
| YT01_Horn_Front_Big_split.stl | 745.7KB | |
| YT01_Horn_Front_Small_split.stl | 702.0KB | |
| YT01_Horn_Rear_Big_split.stl | 769.7KB | |
| YT01_Horn_Rear_Small_split.stl | 805.2KB | |
| YT01_Ladder_Step_Engine_Hood.stl | 64.7KB | |
| YT01_Light_Main_Glass.stl | 200.3KB | |
| YT01_Light_Main_Mk2_Cowl.stl | 390.4KB | |
| YT01_Light_Main_Mk2_Ring.stl | 761.2KB | |
| YT01_Light_Small.stl | 35.2KB | |
| YT01_Light_Small_Glass.stl | 229.8KB | |
| YT01_Motor_Bearing_Rack_Mk4.stl | 38.3KB | |
| YT01_Motor_Mount.stl | 9.1KB | |
| YT01_Motor_Screw.stl | 216.5KB | |
| YT01_Motor_Supports_Mk2.stl | 25.9KB | |
| YT01_Plaque_Legend.stl | 983.7KB | |
| YT01_Plaque_Locomotive_Number.stl | 601.8KB | |
| YT01_Plaque_Logo.stl | 171.0KB | |
| YT01_Railing_Door.stl | 63.7KB | |
| YT01_Railing_Engine_Hood_Long_Front.stl | 68.0KB | |
| YT01_Railing_Engine_Hood_Short_Rear.stl | 64.6KB | |
| YT01_Railing_Outer_Long_Bent.stl | 212.1KB | |
| YT01_Railing_Outer_Short_Bent.stl | 143.1KB | |
| YT01_Railing_Outer_Short_Straight.stl | 80.0KB | |
| YT01_Roof.stl | 2.9MB | |
| YT01_Wheel.stl | 649.0KB | |
| YT01_Window_Doors.stl | 261.9KB | |
| YT01_Window_Sides.stl | 236.9KB | |
| YT01_Windshield_Front_and_Rear_LR.stl | 291.2KB | |
| YT01_Windshield_Wiper_L.stl | 160.7KB | |
| YT01_Windshield_Wiper_R.stl | 161.0KB |
