Motorcycle Trail Bar Mirror 3D Printer Model
The file 'Motorcycle Trail Bar Mirror 3D Printer Model' is (stl) file type, size is 314.0KB.
The file 'Motorcycle Trail Bar Mirror 3D Printer Model' is (stl) file type, size is 314.0KB.
Hi all,
Put a new bar on my 390 Adventure and didn't like the idea of paying 60$ for Doubletake Trail mirrors, so I made my own. Print 2 of these out of your preferred material, either ABS/PEG/ASA, as I would not recommend PLA in the sun. I've had prints in my car out of PETG for 4 years plus now, so I chose that. I modeled these to fit a 22mm bar, and a 2 inch round mirror. (I believe most if not all should be this size out past the bar clamps)
I printed them out of PETG @ 50% for rigidity (probably overkill), with the mirror down on the bed with supports. Similar to the originals, I would zip tie them to the bar with a 6mm zip tie (that's what I gave clearance for), and heat shrink the zip tie to prevent movement.
I bought these mirrors on Amazon, and I will modify the .stl if anything changes or if anyone has suggestions:
https://www.amazon.com/gp/product/B00ZLPABGC/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Hope this saves you some money! Recently added 10, 15, and 20 degree offsets for more swept bars!
| 2inchBarMirror_10Degree.stl | 296.6KB | |
| 2inchBarMirror_15Degree.stl | 297.1KB | |
| 2inchBarMirror_20Degree.stl | 295.7KB | |
| 2inchBarMirror_v1.stl | 293.1KB |
