This is a phone mount for smartphones fitted with the Quadlock attachment. The clamp is 30mm with a 30mm to 22mm adapter which is a common handlebar diameter. It is still a work in progress but it does function and I may design extension arms for it to locate the phone away from the clamp.
I used PETG for the clamp, bottom, top parts and ABS for the purple middle part. For the adapter ring I used TPU.
Not all parts require supports but it is easy to figure out if they do when previewed in the slicer.
When I exported to STL I should have changed the orientation but this can be sorted in the slicer.
Three M4 x 25 countersunk screws and nylocks nuts will be required, I tried to keep additional hardware to a minimum.
I cannot take credit for the way the Quadlock mount locks, this was from another designer and if you want to see this designers cool stuff check out:
https://www.thingiverse.com/tonilara
I will be developing this a bit more until I am happy with it.
| 30mm_to_22mm_adapter_ring.stl | 60.2KB | |
| Quadlock_bottom.stl | 293.1KB | |
| Quadlock_handlebar_mount_ver_2_clamp_bottom.stl | 93.2KB | |
| Quadlock_handlebar_mount_ver_2_clamp_top.stl | 338.6KB | |
| Quadlock_middle.stl | 131.0KB | |
| Quadlock_top.stl | 94.4KB |
